Prime PVC Vanity Collection 2026
A freestanding vanity built from a closed-cell PVC core with a seamless integrated basin and an open display niche. The luxury of stone, without the one weakness every bathroom has.
The collection
A single freestanding body, wrapped in four surfaces developed for contemporary UK bathrooms. Every unit shares the same seamless mitred construction, integrated basin and open display niche.
Cool white ground, soft grey veining
Statuario white marble effect
Our signature finish. A statuario white marble effect wrapped seamlessly over the full body and into the open display niche, so the veining runs uninterrupted around every mitred corner.
Cream marble, brushed brass ready
Warm marble effect with gold veining
A warmer cream marble effect threaded with soft gold veining, developed for schemes finished in brushed brass and champagne gold — the finish to specify for hotel cloakrooms and en-suites.
Deep, quiet, architectural
Honed grey stone effect
A honed grey stone effect with a low-sheen surface that absorbs light rather than reflecting it — the finish to specify for darker, contemporary wet rooms and walk-in showers.
Minimal, seamless, timeless
Ultra matt pure white
An ultra matt pure white with no veining at all — the quietest unit in the collection. The open niche reads as a single folded plane, which is why it sits so well in compact cloakrooms.
Technical specification
Every Prime unit is produced from the same engineering drawing, so a replacement five years from now fits the same footprint, the same waste and the same tap centre.
All dimensions in millimetres. Tolerance ±2 mm.
Material & craftsmanship
Bathroom furniture rarely fails at the surface. It fails where water reaches a wood-based core — at a cut edge, a screw hole, a tired silicone bead. The Prime collection removes that failure point entirely.
A closed-cell PVC core cannot absorb water, swell or delaminate. The failure mode that ends the life of almost every MDF vanity simply does not exist here.
Every corner is cut at 45° and bonded, so the decorative surface folds around the unit with no visible joint, no edge banding and nowhere for moisture to creep in.
The basin is formed as part of the top rather than dropped in, removing the silicone bead that discolours and harbours mould in a conventional counter-top installation.
PVC gives no food source to mould or insects. Wipe down with a damp cloth and a neutral cleaner — no sealing, no re-oiling, no annual maintenance.
Freestanding and light enough to set down and level without a second pair of hands, with no swollen carcass fighting the wall line.
Every unit carries a 10 year guarantee — the confidence that comes from the material, not from the paperwork.
FAQ
Anything not covered here? Send the question through the enquiry form and you will have an answer the same working day.
For a bathroom, yes. MDF and plywood are wood-based, so they absorb moisture at any unsealed cut or screw hole, then swell and delaminate. The closed-cell PVC core used in the Prime collection cannot absorb water at all, which is why it carries a ten year guarantee.
The body measures 550 mm wide × 480 mm deep × 800 mm high, built from 50 mm panels. The integrated basin aperture is 450 × 380 mm with a 260 mm depth to the waste, and the open display niche is 450 mm wide × 300 mm high with a 360 mm internal depth, sitting 240 mm off the floor.
The unit is supplied with a single 90 mm deck tap aperture and takes a standard 32 mm (1¼″) bottle trap. Brassware is specified separately so you can match the rest of the room — our shower mixer range is available in brushed brass and chrome.
It is freestanding. Set it down, level it, fix it back to the wall, then connect the tap and trap. There is no carcass to assemble and no worktop to cut on site.
A damp cloth and a pH-neutral cleaner. Avoid abrasive pads, bleach and solvent-based cleaners. There is nothing to seal, oil or re-varnish over the life of the unit.
Enquiries
Give us the wall length, the waste position and your tile choice, and we will come back with the finish that sits best in the scheme and a full drawing.